
Essay database with free papers will provide you with original and creative ideas.
Design
DESIGN PHILOSOPHY The purpose of this project was to gain some experience with Pspice and to design Uncontrolled Single Phase Full Wave Rectifier with the following two options of output voltage filtering: Option A: With a capacitor. Option B: With an inductor. Uncontrolled Single Phase Rectifier converts AC voltage to DC Voltage. The objective of the design was to achieve ripples within 5% of the rated output voltage, high power factor and low current harmonic distortion.
by using the attached equations. These values were dependent on the specified power output (P ). Then the power factor (PF) and current harmonic distortion (CHD) were calculated for both designs. Based on the values of power factor (PF) and current harmonic distortion (CHD), it was decided which design option gave the most desirable results. After implementation of design, it was verified by Pspice simulation, which allowed to check if the implemented design met the specifications.
